Skip to content

Services
Sculpture Gallery
Sign Gallery
Current Work
Videos
Shop
Carving Resources
FAQ
Contact
About Us
- In the Media

Follow Blog via Email

Enter your email address to follow this blog and receive notifications of new posts by email.

Email Address

Join 2,084 other subscribers

Search for:

Archives

Archives

Custom Sculpture & Sign Co.

127 Wampler St.
Nickelsville, VA 24271

276-479-0388 - Sign Shop

Hours are not fixed. Please call before you visit the shop.

Instagram Images

Starting a piece to display at Ridgeway. Looking forward to being surrounded with such great carvers for a few days.

This sculpture was commissioned as a public art piece for one of the turnabouts in Washington DC. It was a collaboration with fellow artist, designer and gallery owner, Martha Spak ( #marthaspak ) Martha designed the concept and won the public art bid. We did the creation part of the process with Martha’s artistic guidance. If you would like to see it in person it is located near 700 Delaware Ave, SW, WDC, 20024.

The color is finished! Next, I’ll apply an automotive clear coat for added protection.

When sanding fiberglass, it itches bad if it gets on your skin. These painting suits are life savers. The final coat of epoxy is tinted a red brown so I can see where I’ve painted. Next, is painting with air brush!!! It’s going to be fun to finally get some color on these rings!

We applied fiberglass and epoxy to all surfaces. Now, I’m sanding the epoxy smooth, getting it ready for painting

We added a third ring to the sculpture. Next, I will reinforce all the joints with epoxy clay and fill all screw holes. Then, it’s ready for epoxy resin and fiberglass. Stay tuned!

I was walking through the Charlotte, NC airport and all of a sudden I looked over and recognized this sign I made 6 years ago and forgot about! Looks just like new!

I embedded rebar into these rings so that my friend, Larry, could weld them in position to this metal plate. A third ring will be added next!! Stay tuned!

Stay tuned for an interesting project using rings made from laminated 20 lb. density foam!

Paul Waclo and I carved this bear out of an 18 ft. poplar stump 5 ys. ago. We cut it loose and laid it on the ground using a 50 ton crane. After a concrete base with a 13 ft. T beam sticking out of it was completed, we used the crane and set it into place with the T beam lag screwed to its back. We then cleaned up the base by removing bad wood and adding some replacement wood in other places. Lastly, we put some oil wood preservative on the base. Thanks for looking!

Installing a sign in Gatlinburg, Tennessee.

Paul Waclo and I rented a 50 ton crane to cut this giant 10,000 lb. bear loose from the earth so we can preserve it by mounting it on a concrete pad.

6 ft. diameter poplar! Paul Waclo and I rented a 50 ton crane to cut this giant 10,000 lb. bear loose from the earth so we can preserve it by mounting it on a concrete pad.

This is a 4 ft. tall carving of a heron in poplar and finished with an oil wood preservative. Thanks for looking.

Haven’t done a heron in awhile. I love the curves and gracefulness of these birds. The sun is feeling nice on these chilly days. Hope y’all are staying warm.

This an old project from a few years back. These bears were carved out of laminated HDU sheets, painted and installed in a half canoe. The canoe then hangs on a wall as interior decor. Thanks for looking!

These are custom letters carved out of weatherproof high density foam to look like antler letters. Then finished to look like cast bronze. Two different sizes 12” tall and 8” tall. Thanks for looking!

9 ft bear on a 1 ft. base, carved in pine and finished with arborcoat natural oil. Commissioned by #standingrockfarms

9 ft. Bear heading to Cleveland Ohio this week! More pics to come. Thanks for looking.

Installed two cold cast bronze elk mounts in Gatlinburg, TN this week. Please email me at writecwc@gmail.com if you’re interested in purchasing an elk mount.

Land Animals
Birds
Sea Creatures
Misc. Design
Figurative
Architectural
Signs
Furniture

Custom Sculpture & Sign Company

Custom Sculpture, Carved Signs and Fine Crafts

Services
Sculpture Gallery
Sign Gallery
Current Work
Videos
Shop
Carving Resources
FAQ
Contact
About Us
- In the Media

Tag: Carving videos

How to Chainsaw Carve a Hawk

Custom Sculpture & Sign Co. September 8, 2016

I have stopped selling carving DVDs. I am in the process of loading my “DVD” videos onto Youtube. You will …

Read More "How to Chainsaw Carve a Hawk"

Land Animals
Birds
Sea Creatures
Misc. Design
Figurative
Architectural
Signs
Furniture

Services
Sculpture Gallery
Sign Gallery
Current Work
Videos
Shop
Carving Resources
FAQ
Contact
About Us

A WordPress.com Website.

Loading Comments...

Write a Comment...

Email (Required)

Name (Required)

Website