Sculptural Lamp Base Completed

Last time, I posted what the lamp base looked like before it was fired and with color. Thankfully, the clay fired without any problems and I was ready for painting. First, I watered down some house paint as a gesso and painted all the surfaces to seal them. Next, I used acrylic paints (I borrowed my daughter’s paints) and mixed the colors to match the original. Then I sprayed it with a glossy clear coat and glued some felt to the bottom so it wouldn’t scratch. Finally, I attached the lamp hardware and lampshade and delivered it to the happy customer!

This picture shows my replica on the left and the original on the right….

Thank you for looking at this post. If you would like to have something made, simply contact me by going to my official web site, www.customwoodcarvings.com and click the contact page.

If you enjoy these posts, consider subscribing for free by clicking the “follow” button at the top right of the screen. You will recieve an email letting you know when I’ve posted another piece.

In everything you do, do it to the Glory of God,

Kris